Get Started; Install Batteries; Connect Power - Philips AZ3811 User Manual

3 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________

Install batteries

Note
•
You can use both batteries and AC power as power
supply of this apparatus.
•
Batteries are not supplied with the accessories.
1
Open the battery compartment.
2
Insert 8 batteries (type: R-20, UM-1 or
D-cells) with correct polarity (+/-) as
indicated.
3
Close the battery compartment.
b
a

Connect power

Warning
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the apparatus.
•
Risk of electric shock! When you disconnect the AC
power, always pull the plug from the socket. Never pull
the cord.
Note
•
Install the apparatus near the power supply socket and
where the power plug can be easily reached.
1
Switch the voltage selector at the bottom
of the unit to the local power line voltage.
2
Connect the AC power cord to the AC
input jack on the apparatus and to the
power supply socket.
• To switch the apparatus off completely,
disconnect the AC power cord from
the power supply socket.
Tip
•
To save energy: After use, set the source selector to
OFF.
•
To turn off the CD Soundmachine, disconnect the plug
from the power supply socket.
EN 7