Error Messages - Yamaha QY100 Service Manual

ERROR MESSAGES

Monitor
No Data When a job is executed, this will appear if the selected track or area
contains no data, making the job invalid. Re-select the area.
Illegal Input This will appear in response to inappropriate operation or input. Check
your input method.
Preset Phrase This will appear when you attempt to edit a Preset Phrase. To edit a preset
phrase, copy the phrase to a User Phrase and edit the User Phrase.
Preset Pattern This will appear when you attempt to record to a Preset Pattern. You
cannot record to Preset Patterns.
Preset Chord This will appear when you attempt to change a Preset Chord Template
with a Job (transpose, etc.) operation.
Now Bulk Mode This will appear when you attempt to operate the QY100 while it is
receiving bulk data.
System
Memory Full A song file or stylefile could not be loaded because the QY100's inter-
nal memory is full.
Delete unwanted song and/or style files to increase the amount of
available memory. When a song or style file is loaded and previous
data in the destination song or style file will be erased.
NotEnough Memory A song file or style file could not be loaded because the QY100's inter-
nal memory is not enough.
Delete unwanted song and/or style files to increase the amount of
available memory. When a song or style file is loaded, previous data in
the destination song or sytle file will not be erased.
Backup Batt.Low This will appear when the internal backup battery of the QY100 has run
down. Contact the nearest Yamaha dealer or the authorized distributor
for your country to have the battery replaced.
Power Batt.Low This will appear when the batteries (Size AA x6) powering the QY100
has run down. When the batteries run down more seriously, "Power
Batt.End" message will appear.
Power Batt.End This will appear when the batteries (Size AA x6) powering the QY100
has run down seriously. In this case, memory card functions are no
longer accessible. Replace the entire set of old batteries with a new
set of batteries as soon as possible.
Factory Set After the power is switched ON, a system diagnosis is run on the QY100's
system. If the diagnosis finds the RAM to be defective, this message will
appear and the memory will be reset to its original factory settings. Data
for Song, User Patterns, and User Phrases will all be eliminated.
MIDI
MIDI Data Error This will appear when the received QY bulk data contains an error.
Now Running This will appear when the QY100 is receiving bulk data. Other MIDI
signals cannot be received at this time.
QY100
39