Handling Of Cables; Handling Of Transducer And Water Temperature Sensor - Honda HE-1500 Operation Manual

2. HANDLING OF CABLES

● Be sure to use the specified power supply cable and fuse.
It cause to heating or firing.
● Do not leave the power plug as it is while it is pulled out of the unit.
If the plug gets wet, it causes to heating or firing due to short circuited.
● Be sure to wire in order to prevent the cables from interfering to operate
boat.
If feet of crews or operating equipments are caught in cables, it causes to the
accident.
※ Do not put the heavy objects on cables or do not bend cables
excessively.
● Do not disassemble or modify the cables.
It causes to heating, firing or electric shock.
● Do not use the damaged cables.
It causes to firing or electric shock.
● Do not pull the cable when you pull out the plug.
It causes to firing or electric shock because the cable is broken.
※When you pull out the plug, be sure to have it in your hand and pull it.

3. HANDLING OF TRANSDUCER AND WATER TEMPERATURE SENSOR

● Work on the board is too unstable and risky.
Installation and maintenance of transducer and water temperature sensor
should be done after you land and fix the boat.
Unless you keep it, human damage resulting in death or serious wound will
occur.
※ Please ask to shop for installation.
2