Fujitsu PRIMERGY BX620 S4 User Manual page 160

Chapter 5 Operations after OS Installation
4
Select a LAN adapter to set up a VLAN and right-click it.
A VLAN cannot be set to an adapter composing a team.
5
Click [Add VLAN].
6
Specify [ID] and [Name]. Then click [OK].
The [ID] should be identical with the switch setting. The allowable range is 1 to 4094.
The [Name] does not need to be identical with the switch setting.
When the confirmation message appears, select [Yes].
7
Repeat Steps 4 through 6 to set respective VLANs.
8
Click [OK] to exit Intel
When configuring a VLAN is completed, a virtual adapter "Intel
Virtual Adapter" will appear.
Upper protocols will be bound with this virtual adapter.
You cannot bind them with the LAN card consisting a team.
The IP address should be specified in this virtual adapter.
9
Restart the Server Blade.
Deleting a VLAN
Follow the steps below to delete a VLAN.
1
Log on to the Server Blade with administrator privileges.
2
Click [Start] – [Settings] – [Control Panel] – [Intel
®
Intel PROSet.
3
Select the VLAN to delete and click it.
4
Click [Delete VLAN].
The confirmation message appears.
5
Click [OK].
When an attempt is made to delete the last VLAN, the message will be displayed. Click [OK].
6
Click [OK] to exit Intel
7
Restart the Server Blade.
160
®
PROSet.
®
PROSet.
®
Advanced Network Services
®
PROSet Wired], and start