Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Samsung SCB-2002
Summary of Contents for Samsung SCB-2002
- Page 1 Super High ResolutionCamera SCB-2002 User Manual SCB-2002PH...
-
Page 2: User Manual
Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. - Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCB-2002 SERIES • NTSC MODEL • PAL MODEL SCB-2002N SCB-2002P SCB-2002PH ■ MODEL DESCRIPTION •...
-
Page 4: Safety Information
safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CAUTION: COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. - Page 5 fi re or electric shock. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
-
Page 6: Fcc Statement
safety information FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. -
Page 7: Important Safety Instructions
Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents... -
Page 8: Table Of Contents
contents INTRODUCTION Features What’s included Component names and functions Lens CONNECTION Connecting to a monitor Connecting to power Control via RS-485 Interface Using coaxial communications CAMERA OPERATION Menu Confi guration Menu Setup TROUBLESHOOTING Troubleshooting SPECIFICATIONS Specifi cations 8_ contents... -
Page 9: Introduction
650 TV lines for color and 700 TV lines for BW. Excellent Sensitivity The built-in high sensitivity COLOR CCD produces a clear image. - SCB-2002 COLOR : 0.1 Lux(50IRE,@F1.2), B/W : 0.01 Lux(50IRE,@F1.2) - SCB-2002H COLOR : 0.1 Lux(50IRE,@F1.2), B/W : 0.01 Lux(50IRE,@F1.2) Motion Detection Without assistance from an external sensor, this camera independently detects and traces objects while examining movement to activate the alarm. - Page 10 Communication Coaxial and RS-485 communication methods are supported. - Coaxial Communications : Pelco Coaxitron - RS-485 Communications : Samsung-T, Samsung-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC, GE, AD The camera’s OSD is complimented by 18 languages. - NTSC : English, Korean, Japanese, Spanish, French, Portuguese, Taiwanese...
-
Page 11: Front View
COMPONENT NAMES AND FUNCTIONS FRONT VIEW ❶ Tripod Mounting Bracket Screw Hole Used to fix the Tripod Mounting Bracket to the top of the camera. ➋ C-Mount Lens Adapter Install this adapter to use a C-Mount Lens. ➌ Back Focus Control Lever Adjust focus by this Back Focus Lever. -
Page 12: Bottom View
introduction BOTTOM VIEW Cannot fasten screws here. When fastening the screw, make the screw fastening part head to the camera module. ➎ Tripod Mounting Bracket Screw Hole Used to fix the camera on a bracket or tripod. The screw sizes for this hole are as follows: 1/4”-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197”... -
Page 13: Rear View
REAR VIEW ⓬ ⓫ ⓭ ⓮ ➏ ⓯ ➐ ➑ ⓰ ➒ ❿ * High Voltage Type (SCB-2002PH) ➏ Function Setup Button: • SET button : Displays the menu on the screen and uses enter sub menu. • Up&Down button : Used to move the cursor up or down in the menu screen. •... - Page 14 introduction ⓫ D & N Input Port : You can switch to Day & Night Mode by connecting an external signal to this port. ⓬ MD Output Port : Motion detection signals are output through this port. ⓭ Ground Terminal ⓮...
- Page 15 LENS The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used.
- Page 16 introduction Fit the cover of the auto iris lens connector plug, remove the protective glass cover from the front of the camera, and fasten the auto iris lens by turning it clockwise. Set focus of camera using Back Focus Control Lever of camera side after combining Auto Iris lens.
- Page 17 Turn the C-Mount lens clockwise to install it. C-MOUNT ADAPTER Set focus of camera using Back Focus Control Lever of camera side after combining C-Mount lens. Use the lens connector shown in the following fi gure. If the dimensions of the connector are not correct, it may damage the camera, or the lens may not be installed fi...
-
Page 18: Connection
connection CONNECTING TO A MONITOR Connect the Video OUT port on the rear panel of the camera to a monitor. CCD Camera Monitor As the connecting method varies with the instruments, refer to the manual supplied with the instrument. Only connect the cable when the power is turned off. CONNECTING TO POWER Since power specifications differ depending on the model, make sure to check your model name and specifications before connecting power. - Page 19 High Voltage Type (AC230V, 50Hz) Use AC230V, 50Hz power source For SCB-2002PH. When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(—/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018...
-
Page 20: Control Via Rs-485 Interface
Initial value 9600 8-NONE-1 ENABLE To control the camera by constructing an additional controller, use the SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON and PANASONIC, GE, AD protocol. USING COAXIAL COMMUNICATIONS Coaxial Communications System OSD Control method If you set the sensitivity level of the sub menu item (of COAX) to “Low”, you have to press the MENU/ENTER (OSD KEY) button twice in a row to access the OSD menu. - Page 21 ALARM NETWORK BACKUP ZOOM FREEZE BACKUP SEARCH TELE WIDE VIEW PRESET MODE AUDIO ALRAM MENU DVD RECORDER OPEN/CLOSE RETURN : BNC • • ---- : RS-485 - Video Cable The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp.
-
Page 22: Menu Confi Guration
camera operation MENU CONFIGURATION MAIN SETUP ● ● ● LENS VIDEO MANUAL ● ● ● BRIGHTNESS SHUTTER EXPOSURE ● ● SENS-UP RETURN ● ● SSDR ● ATW ● OUTDOOR ● INDOOR WHITE BAL ● MANUAL ● AWC SET ● ● ●... - Page 23 MAIN SETUP 1. LENS Select the function Change the status 2. EXPOSURE by moving up or by moving the down direction of setup switch left or 3. SSDR function setup switch. right. 4. WHITE BAL 5. BACKLIGHT 6. SSNR3 7. DAY/NIGHT AUTO 8.
- Page 24 camera operation FOCUS ADJ (DC, VIDEO) : To adjust the DC and VIDEO lens focus correctly, you must activate the Focus Settings mode under each lens menu. To activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode.
- Page 25 MANUAL : You can control shutter speed manually. (NTSC MODEL - 1/60sec~1/120,000sec, PAL MODEL - 1/50sec~1/ 120,000sec) A.FLK : Select this when you experience picture fl icker, this happen when there is a clash with the installed lighting frequency. EXTERN : Use the Shutter Speed Select Terminal on the back of the camera to control the shutter speed via an external input.
- Page 26 If GAIN of EXPOSURE is not in use, the SENS-UP (Sensitivity-Up) is set to “---“. RETURN : Select this to save the changes in the EXPOSURE menu and return to the SETUP menu. SSDR(SAMSUNG SUPER DYNAMIC RANGE) SSDR illuminates darker areas of an image to MAIN SETUP even out the overall brightness while retaining 1.
- Page 27 If the camera is directed towards a fl uorescent light or is installed in a place where illumination changes dramatically, the White Balance operation may become unstable. BACKLIGHT The SCB-2002/2002H is designed so that it delivers a MAIN SETUP distinctive subject and background at the same time, 1.
- Page 28 camera operation Select a desired mode using the Function Setup button depending on the camera purpose. OFF : Not being used. USER BLC : Enables a user to select a desired area on a picture and view that area more clearly. LEVEL : Adjusts the brightness level of a monitoring area.
- Page 29 DAY/NIGHT You can display pictures in color or in black and white. When the SETUP menu screen is displayed, MAIN SETUP select ‘DAY/NIGHT’ by using the Function 1. LENS Setup button so that the arrow indicates 2. EXPOSURE ‘DAY/NIGHT’. 3. SSDR 4.
- Page 30 camera operation When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between Color and Black & White may not occur. If the GAIN of EXPOSURE menu is set to OFF, AUTO mode is not available to select. ...
- Page 31 CRT : Please select this menu item when LCD MONITOR using a CRT monitor. You can change the ▶ GAMMA 0.55 PED level, color gain in the sub menus. PED LEVEL IIIII IIIIIIIIIIIIIIII USER : Please use this menu item when COLOR GAIN IIIIIIIIIIIIIII IIIIII using a monitor other than stan dard ones.
- Page 32 camera operation CAM TITLE : If you enter a title, the title will appear on the monitor. ➊ If the SPECIAL menu screen is CAMERA TITLE SETUP displayed, use the Function Setup switch so that the arrow indicates A B C D E F G H I J K L M ‘CAM TITLE’.
- Page 33 ➊ Press the Function Setup switch. ➋ You can select a desired phase from 0 to 359 when select ‘phase’. EXTERN : The camera can use the external power source frequency for the synchronization. Regardless of the input voltage the EXTERN MODE is available only when an external trigger signal input into camera.
- Page 34 camera operation ► AREA : You can select up to 4 areas. MASK AREA ► MODE : Determines whether to use 1.AREA AREA1 the area selected in the AREA. 2.MODE 3.TOP IIIII IIIIIIIIIIIIIIII ► TOP / BOTTOM / LEFT / RIGHT : 4.BOTTOM IIIIIIIIIIII IIIIIIIII Adjust the size and position of the...
- Page 35 DIS (Digital Image Stabilizer) : This function mitigates any picture movement due to external factors such as wind. As the DIS function uses the digital zoom the camera’s resolution will decrease. DIS doesn’t operate when background illumination is too low. ...
- Page 36 DISP ID : Display camera title on top left corner of the screen. PROTOCOL : Select the communication PROTOCOL. (SAMSUNG-T, SAMSUNG-E , PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON PANA., GE and AD) COAX : Specify the use of coaxial communications.
- Page 37 EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. SAVE : Save the current settings and exit the MAIN SETUP menu. NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu. RESET: Resets the camera settings to the factory defaults.
-
Page 38: Troubleshooting
troubleshooting TROUBLESHOOTING If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problems Troubleshooting Nothing appears on the screen. Check that the power cord and line connection between the camera and monitor are properly connected. -
Page 39: Specifi Cations
specifications SPECIFICATIONS Item SCB-2002N SCB-2002P SCB-2002PH Video 1/3” Super HAD CCD II Imaging Device Total Pixels 1020(H) x 508(V) 1020(H) X 596(V) Effective Pixels 976(H) x 582(V) 976(H) x 494(V) Scanning System 2:1 Interlace / Progressive Synchronization Internal / Line lock / Extern Frequency H : 15.625KHz / V : 50Hz H:15.734KHz / V:59.94Hz... - Page 40 NONE Communication Coaxial Control ( SPC-300 Compatible ), RS-485 Coax : Pelco-C (Coaxitron) Protocol RS-485: Samsung-T, Samsung-E, Pelco-D, Pelco-P, Panasonic, Bosch, Honeywell, Vicon, GE, AD Environmental Operating Temperature / -10°C ~ +50°C (+14°F ~ +122°F) / Less than 90% RH...
- Page 41 MEMO...
- Page 42 MEMO...
- Page 43 MEMO...
- Page 44 MEMO...
- Page 45 MEMO...
- Page 46 MEMO...
- Page 47 MEMO...
- Page 48 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungcctvusa.com...