Cisco 4400G Quick Start Manual page 10

digital display makes and models to your DMP only if you
combine the HDMI cable with an HDMI-to-DVI adapter for
video, and then use the provided audio cable (3mm jack; red and
white RCA plugs) for audio.
To attach an analog display to your DMP, we recommend that
you use the provided composite/RCA cable for both video
and audio.
On the back of your DMP chassis, do one of the
Step 1
following:
• If you will connect your DMP to a digital display
that has an HDMI interface, plug the male end of
the HDMI cable into the HDMI interface on
your DMP.
• If you will connect your DMP to a display that does
not have an HDMI interface, do all of
the following:
–
–
10
Plug the male end of the HDMI cable into the
HDMI interface on your DMP, and then
connect an HDMI-to-DVI adapter to the other
end of the HDMI cable.
Plug the 3mm jack on the audio cable into the
AUDIO interface on your DMP.