Cisco 4305G Quick Start Manual page 22

c. From the Interface (DMP display output) list, choose
the connector type and signal type that you are using.
For example, you might use SVIDEO.
If you do not know which options to choose, see the
manufacturer documentation for your DMP display.
From the Color Space list, choose the absolute color
Step 2
space that your DMP display uses.
If you chose RGB as the color space, choose an option
Step 3
from the Color Component Order list to define the
order in which to store red, green, and blue data. This
definition is sometimes called the left-to-right additive
color model.
(Optional) Move any or all of the sliders to compensate
Step 4
for DMP display deficiencies in video (brightness,
contrast, or saturation) or audio (channel volume).
To confirm your choices and to implement them until
Step 5
you change them or until you restart your DMP,
click Apply.
To test if your choices are suitable ones for your DMP
Step 6
display, click Show IP in the DMP Mode area.
Your DMP display should show a Cisco logo and
should show the IP address for your DMP.
22