2.2
Flexible Button Assignment
ISDN Service Button
Allows you to assign a Flexible (CO, DSS, PF) button as the ISDN Service button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
8
3
ISDN service number
4
AUTO DIAL
STORE
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• The entry number in step 3 depend on the services which you want to perform. For more
information about the ISDN network services or the specific numbers, please consult with
your ISDN network supplier.
• You can use 0 through 9,
18
Programming
(Assignment)
1. Press the desired Flexible (CO, DSS, PF) button which you wish to
assign as the ISDN Service button.
2. Dial 89.
• The display shows:
9
3. Dial the specified ISDN service number.
• Up to 24 digits can be stored.
• To erase an incorrect entry, press the CLR (S2) button or the
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
CLR
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the overlay.)
and # for storing.