Lan - Created By Using Nat - Draytek Vigor2920 User Manual

9.
10. Click Edit to open a new window.
11. Click Edit to open the following window. Check the ACT box, first.
12. Then click Edit of Local Address to set a worker's subnet address. Click Edit of
5 . 4 L A N –
5 . 4 L A N –
An example of default setting and the corresponding deployment are shown below. The
default Vigor router private IP address/Subnet Mask is 192.168.1.1/255.255.255.0. The built-in
DHCP server is enabled so it assigns every local NATed host an IP address of 192.168.1.x
starting from 192.168.1.10.
Vigor2920 Series User's Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
If the worker has connected to the headquarter using host to host VPN tunnel. (Please
refer to Chapter 3 VPN for detail instruction), he may set up an index for it. Enter the
Class Name of Index 3. In this index, he will set reserved bandwidth for 1 VPN tunnel.
Remote Address to set headquarter's IP address. Leave other fields and click OK.
C r e a t e d b y U s i
C r e a t e d b y U s
n g N A T
i n g N A T
220