Canceling The Main Room Operations; Selecting The Main Room Source To Play - JVC RX-DP10VBK Instructions Manual

Canceling the Main Room Operations

To stop the main room operations and sounds from the main
room speakers, press MAIN ROOM ON/OFF so that the MAIN
ROOM ON/OFF lamp goes off.
MAIN ROOM
ON/OFF
On the unit
The currently selected front speakers indicator(s) also go(es) off
from the display (no sound will be heard in the main room).
To use this receiver for the main room operations again, press
MAIN ROOM ON/OFF again (the MAIN ROOM ON/OFF lights
up).
The front speakers indicator(s) previously selected light(s) up.
Now the buttons and controls on the unit work for the main room
operations.
Notes:
• If you have turned off the receiver with the volume level set at more
than level "–35 dB," the volume level will be automatically set at
level "–35 dB" next time you turn on the receiver.
• If "TURN ON MAIN OR SUB ROOM" appears on the display, press
MAIN ROOM ON/OFF or SUB ROOM ON/OFF to listen to the
sound in the main room or in the sub-room; otherwise, the receiver
will turn off after about 1 minute.

Selecting the Main Room Source to Play

Press one of the source selecting buttons.
• The selected source name and Surround/DSP mode also appear on
the display.
On the unit:
DVD DVD MULTI VCR 1 VCR 2 TV/DBS VIDEO
From the remote control:
DVD DVD MULTI
VCR 1 VCR 2
TV/DBS VIDEO
21
MAIN ROOM
ON/OFF
From the remote control
CD PHONO TAPE/MD CDR FM AM
PHONO CD
CDR
TAPE/MD
AM
FM
Selected source name
ANALOG
L R
SUBWFR
The current Surround/DSP mode appears.
DVD : Selects the DVD player.
DVD MULTI : Selects the DVD player for viewing the digital video
disc using the analog discrete output mode (5.1CH
reproduction).
To enjoy the DVD MULTI playback, see page 53.
VCR 1 : Selects the video component connected to the VCR 1
jacks.
VCR 2 : Selects the video component connected to the VCR 2
jacks.
TV/DBS : Selects TV sounds (or the DBS tuner).
VIDEO : Selects the video component connected to the VIDEO
jacks.
CD* : Selects the CD player.
PHONO* : Selects the turntable.
TAPE/MD* : Selects the cassette deck (or the MD recorder).
CDR* : Selects the CD recorder.
FM* : Selects an FM broadcast.
AM* : Selects an AM broadcast.
Notes:
• When connecting an MD recorder (to the TAPE/MD jacks), and a
DBS tuner (to the TV SOUND/DBS jacks), change the source
names shown on the display. For details, see "Changing the Source
Name" on page 25.
• When you press one of the audio source selecting buttons on the
remote control marked with an asterisk ( * ), the receiver
automatically turns on. If you turn on the receiver with the MAIN
ROOM/SUB ROOM (LEARN/TRANSMIT) selector set to "SUB
ROOM," press MAIN ROOM ON/OFF to activate the main room
operations.
– Pressing one of the audio source selecting buttons on the remote
control (except FM and AM) with the MAIN ROOM/SUB ROOM
(LEARN/TRANSMIT) selector set to "MAIN ROOM" while the
receiver is turned on but the main room is turned off, the main
room is turned on with the audio source selected.
Speaker and signal indicators on the display
By checking the following indicators, you can easily confirm which
speakers you are activating and which signals are coming into this
receiver from the source.
Speaker indicators
L C R
SUBWFR
LS RS
SB SB
The speaker indicators light only —:
• The frames of "L," "C," "R," "LS," "RS, " and "SB" light up, when
the corresponding speakers are set to "LARGE" or "SMALL " (see
"Setting the Speakers—SPEAKER SETTING" on page 36) AND
when the corresponding speaker is required for the DSP mode
currently selected.
• When "SUBWOOFER" is set to "YES,"
"Setting the Speakers—SPEAKER SETTING" on page 36.)
SPEAKERS 1
VOLUME
dB
Signal indicators
L C R
LFE
LS S RS
SB SB
lights up. (See
SUBWFR