Draytek Vigor2830 Series User Manual page 91

Obtain an IP address automatically – Click this button to
obtain the IP address automatically.

Router Name – Type in the router name
provided by ISP.

Domain Name – Type in the domain name that
you have assigned.
DHCP Client Identifier for some ISP

Enable: Check the box to specify username and
password as the DHCP client identifier for some
ISP.

Username: Type a name as username. The
maximum length of the user name you can set is
63 characters.

Password: Type a password. The maximum
length of the password you can set is 62
characters.
Specify an IP address – Click this radio button to specify
some data.

IP Address – Type in the private IP
address.

Subnet Mask – Type in the subnet mask.

Gateway IP Address – Type in gateway IP
address.
Default MAC Address – Type in MAC address for the
router. You can use Default MAC Address or specify
another MAC address for your necessity.
Specify a MAC Address –Some Cable service providers
specify a specific MAC address for access authentication.
In such cases you need to click the Specify a MAC
Address and enter the MAC address in the MAC Address
field.
79
Vigor2830 Series User's Guide