Draytek Vigor2830 Series User Manual page 37

1. Choose WAN1 as WAN Interface and click the Next button; you will get the following
page. Choose PPPoE XXXX or PPPoA XXXXX as the protocol.
Available settings are explained as follows:
Item
VPI
VCI
Protocol /
Encapsulation
Fixed IP
IP Address
Primary DNS
Secondary DNS
Back
Next
Cancel
Description
Type in the value provided by ISP.
Auto detect – Click this button to have the VPI and VCI to
be detected by the system automatically
Type in the value provided by ISP.
There are several modes offered for you to choose for
WAN1 interface.
Click Yes to enable Fixed IP feature.
Type the IP address if Fixed IP is enabled.
Type in the primary IP address for the router.
Type in secondary IP address for necessity in the future.
Click it to return to previous setting page.
Click it to get into the next setting page.
Click it to give up the quick start wizard.
25
Vigor2830 Series User's Guide