1.TROUBLESHOOTING FOR THE HARDWARE
Paper misfeed in the Finisher MJ-1101 and the Hole Punch Unit MJ-6103 (both
optional)
Paper misfeed in the upper receiving tray
Raise the lever and open the upper receiving tray of
1
the finisher.
Remove the misfed paper.
2
Open the cover holding the handle of the Bridge Unit.
3
When the Hole Punch Unit MJ-6103 is installed, proceed to step 5.
Remove the misfed paper.
4
Proceed to step 8.
1 TROUBLESHOOTING FOR THE HARDWARE
2
Clearing a Paper Misfeed
1
29