Paper Jam In The Bridge Kit (Optional); Paper Jam In The Finisher Mj-1101 And The Hole Punch Unit Mj-6103 (Both Optional) - Toshiba e-studio206l Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE

Paper jam in the Bridge Kit (optional)

1
Open the cover holding the handle of the Bridge Kit.
2
Remove the jammed paper inside the Bridge Unit.
If the jammed paper cannot be removed because the right side is
caught by the fuser unit, follow the steps on
the fuser unit".
3
Close the Bridge Kit cover.

Paper jam in the Finisher MJ-1101 and the Hole Punch Unit MJ-6103 (both optional)

Paper Jam in the upper receiving tray
1
Raise the lever and open the upper receiving tray of
the finisher.
2
Remove the jammed paper.
1 TROUBLESHOOTING FOR THE HARDWARE
P.24 "Paper jam in
2
1
Clearing a Paper Jam 27