Reject; Pause; Play - Pioneer LD-V4400 Level I User Manual

Industrial laser disc player level i & iii
Hide thumbs Also See for LD-V4400 Level I:
Table of Contents

Advertisement

Chapter Three • LD-V4400 Level I & III
3.2.2 Description of Each Remote Control Function
Each remote control unit button associated with a corresponding command that
may be used to control the LD-V4400 is described below. See Figure 3-C on
page 3-5 and Appendix B for descriptive illustrations of the RU-V103.

1) REJECT

Function: Pressing this button is effective only when the player is in Spin Up or
Random Access Mode. When this command is sent to the player, the active mode
of the player is changed to Spin Down, processing waits until the spindle stops,
and then the active mode is changed to Park.
NOTE: This button cannot be used to open or close the player's disc drawer; it is
used to put the player into Park.

2) PAUSE

Function: Pressing this button causes the player to cease playback temporarily.
Explanation: The player enters Pause Mode when the PAUSE button is pressed.
In Pause Mode, video is squelched. Press PLAY or any other motion button to exit
Pause Mode.
NOTE: The player does not exit Pause Mode if the PAUSE button is depressed again
while in Pause Mode. (The PAUSE button does not toggle PAUSE ON and OFF.)

3) PLAY

Function: Pressing this button starts the player and plays the videodisc.
Explanation: The operation performed when the PLAY button is pressed differs
depending on the active mode of the player:
While the door is opening or when the door is open
If this button is pressed while the door is opening or when the door is open,
the player closes the door. After the door is closed, the player enters Park
Mode and then determines whether a disc is in the drawer. If there is no
disc in the drawer, the player does nothing. If there is a disc in the drawer,
it proceeds through the operations described in Park Mode below.
In Park Mode
In Park Mode the player determines whether or not there is a disc in the
drawer. If there is no disc, the player does not operate. If there is a disc, the
player enters Spin Up Mode and spins-up the disc. When Spin Up Mode
ends, the player enters Random Access Mode and begins playing the disc.
3-6
LD-V4400 Level I & III User's Manual
TP 116
v1.1 • 9/93

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents