Reject; Play - Pioneer LD-V8000 Level III User Manual

3.2.2. Description of Each Remote Control Function
Each remote control unit button associated with a corresponding command that
may be used to control the LD-V8000 is described below. The symbols next to the
description indicate whether the function is available on the RU-V103 and/or on
the RU-V6000T. (See Figures 3-C and 3-D and Appendix C for descriptive
illustrations of the RU-V6000 and the RU-V103.)
Commands available only on the RU-V6000T
Commands available only on the RU-V103
Commands available on both the RU-V6000T & RU-V103

1) REJECT

RU-V6000T & RU-V103
Function: Pressing this button is effective only when the player is in Spin Up or
Random Access Mode. When this command is sent to the player, the active mode
of the player is changed to Spin Down, processing waits until the spindle stops,
and then the active mode is changed to Park.
NOTE: This button cannot be used to open or close the player's disc drawer; it is
used to put the player into Park.

2) PLAY

RU-V6000T & RU-V103
Function: Pressing this button starts the player and plays the videodisc.
Explanation: The operation performed when the PLAY button is pressed differs
depending on the active mode of the player:
While the door is opening or when the door is open
If this button is pressed while the door is opening or when the door is open,
the player closes the door. After the door is closed, the player enters Park
Mode and then determines whether a disc is in the drawer. If there is no
disc in the drawer, the player does nothing. If there is a disc in the drawer,
it proceeds through the operations described in Park Mode below.
In Park Mode
In Park Mode the player determines whether or not there is a disc in the
drawer. If there is no disc, the player does not operate. If there is a disc, the
player enters Spin Up Mode and spins-up the disc. When Spin Up Mode
ends, the player enters Random Access Mode and begins playing the disc. If
the automatic dump program execution switch is on, the player reads the
Level II program into memory and then executes the program. If there is no
Level II program on the disc, if the program cannot be read or if the
LD-V8000 Level I & III User's Manual
LD-V8000 Level I & III • Chapter Three
RU-V6000T ONLY
RU-V103 ONLY
TP 113 v. 2.1 • 2/93
RU-V6000T & RU-V103
3-7