Timing Requirement - Philips 160E1SB/93 Service Manual

Software control functions via OSD/Control adjustment functions
Please refer to following Hudson 9 OSD definitions, if any deviation, there refer to PVT exit sample.
ITEM
1 OSD DEFINITIONS
2 OSD LANGUAGES
3 OSD TREE
4 POWER ON LOGO

Timing requirement

Factory Preset mode definition:
1. Perfect FOS while presenting those timings
2. Will specify those timing in User's Manual
Preset mode definition:
1. Need to support those timings
2. Perfect FOS after auto adjustment
User mode
1. Can save those timing that not in preset mode and can be showed (not over scalar or panel spec.)
2. It needs to reserve the 10 timings space in memory size.
Mode storing capacity
Factory preset modes
User modes
Factory preset modes (8 modes)
• Factory modes and preset modes are defined in the enclosed timing table file
160E1 1366 768
Timming Table-08102
• Video timing mode (internal firmware support)
60Hz: 480p/720p/1080i/1080p
50Hz: 576p/720p/1080i/1080p
PHILIPS 160E1 OSD
Definition-0810222.x
H8 OSD translation -
20070425 - Final.xls translation _ 2008041
PHILIPS OSD
Tree-081022.xls
1366x768.bmp
: 08
:23
Reset -
No: Exit
Yes: Auto adjustment for displaying
timing mode and recall factory preset
9 LANGUAGES
H9 new item
Power On Logo: Power On
up Philips logo 3 seconds
input signal.
This picture is reference only. The
official drawing will send out by PM.
Meridian 1 61
Show
Change to