Basic Operations; Setting The Clock; Adjusting The Clock - JVC CA-UXQD9S Instructions Manual

Basic Operations

Preparation/Basic Operations
This manual explains the operations assuming that
you will use the remote control. Some buttons on
the main unit are the same as those on the remote
control. You can use either button in this case.
CAUTION
• Set the remote control mode selector to
AUDIO before using the number buttons.

Setting the Clock

You can set the clock while the main unit is turned
either on or off.
Example: To set the clock to 10:10 a.m.
1
Press .
2
Remote control Set the remote control mode selector to
mode selector
AUDIO before using the number buttons.
3
Number buttons
4
Press
then adjust the clock starting from step 2.
Press
Set the hour.
Back Next
• Holding down the button causes the hour to
increment.
• You can use the number buttons to specify
the hour.
Refer to "Using the number buttons" shown
below.
Using the number buttons
Examples: 3:
→
13:
→
20:
→
23:
Press .
• To return to step 2, press
Set the minute in the same manner
as steps 2 and 3.

Adjusting the clock

four times to display the clock, and
Displaying the clock while using the
main unit
repeatedly.
NOTE
• The time display on the main unit is a 24-hour
clock.
• The clock will gain or lose approximately 1 minute
per month.
• Set the clock again after you have disconnected
the power plug or a power cut has occurred.
→
.
16