Basic Operations of the DVD Player
Listening to Discs
How to read this manual
• Operations are described by mainly using the
remote control buttons. If there are the same
marks on the main unit, the buttons on the main
unit can also be used.
• The following marks tell you for which type of the
discs the operation can be made.
• The illustrations and TV screens may be different
between the actual case and the description.
• "VCD" stands for "Video CD".
• "SVCD" stands for "Super Video CD".
NOTE
• Set the remote control mode selector to
AUDIO before using the number buttons.
21
(Refer to page 36 for playing back MP3/WMA and
JPEG.)
1
2
Remote control
mode selector
3
■Display for DVD VIDEO
Number buttons
Playback
Press
on the main unit.
• The disc tray comes out.
Place a disc on the disc tray.
Letter-printed surface
• When you want to listen to an 8 cm disc,
place it on the inner hollow of the disc tray.
Press
.
Display while a DVD VIDEO is being played
back:
DVD indicator
(The DVD indicator lights up while the DVD VIDEO is
stopped. The DVD indicator flashes while the DVD
VIDEO is being played back or paused.)
Title number
Elapsed playing time
Display while the DVD VIDEO is stopped:
Total number of titles
Introduction
Disc tray
Chapter number