Honeywell HY-200 Series Owner's Manual page 6

CONTROLLING THE FEBREZE
Once the Febreze
®
properly installed, use the Febreze
located on the top of the Fan control panel (Fig. 4), to
control the amount of scent released into the air.
Turn the Febreze Scent Control Dial clockwise to release
®
increasing amounts of Febreze
Keep the Scent Control Dial in the LOW position if you want
the minimum amount of Febreze
the air and circulated by your fan.
Turning the Febreze
right (MAXIMUM) will release the maximum amount of Febreze
PLEASE NOTE:
The speed at which you run your Honeywell with Febreze Freshness™ Cool & Refresh Fan
does affect the length of time your Set&Refresh
An installed and activated Set&Refresh
fan at HIGH speed instead of LOW speed.
If you regularly run your fan at LOW speed while a Set&Refresh
installed and activated, the Set&Refresh
To operate the fan without any scent, simply remove the scent cartridge from the fan.
Febreze Set&Refresh
®
Set&Refresh products are sold. Click on the 'Buy Now' link on www.Febreze.com to locate a
®
retailer near you.
CAUTION: EYE IRRITANT. Avoid contact with eyes. Do not put fingers into product vent. Wash
hands after handling perfume cartridge.
KEEP OUT OF REACH OF CHILDREN AND PETS. FIRST AID TREATMENT: Contains fragrance
oils. If eye contact occurs, rinse with plenty of water for 20 minutes. If eye irritation persists,
consult a physician.
IF SWALLOWED; do not induce vomiting, call a physician or poison control center immediately.
Set&Refresh scent cartridge is
®
Scent Control Dial
®
scent into the air.
®
scent to be released into
®
Scent Control Dial all the way to the
®
scent cartridges are available in a variety of scents wherever
®
SCENT
®
® scent cartridge will last.
®
scent cartridge will empty faster if you run your
® scent cartridge will last longer.
- 6 -
Scent Control
Fig. 4
scent into your room.
®
® scent cartridge is