General; Application Examples; Control And Display Elements - Philips RSAT 2 Customer's Manual

Remote Control Panel RSAT2
1.

GENERAL

1.1

APPLICATION EXAMPLES

Fig. 1: RSAT2 Remote Control Panel
1.2

CONTROL AND DISPLAY ELEMENTS

Operating Instructions - Rev. 1 / 11.2001
The remote control panel RSAT2 is used for copying button functions of the DD35
main operation panels for control of mixer functions from another workplace.
Connected to DD35 main panel via RS-422 cable which can be ordered optionally.
When the learn mode is applied single button functions also the built in Digipots and
the Fader can be trained with functions of the DD35 main panel –
Standard predefined settings for single M/E operation are also availlable.
Remote control on source selection, effects register recall, transitions, macros,
Shot-Box, Keyer adjust ...., specifically in conjunction with the use of an additional
sidepanel control PC.
D
3 x16 button source selection busses with 4 digit displays
D
Transition control field with fader
D
4x Digipots
D
4x Delegation buttons
D
Learn mode buttons with Display
D
2x Menu control buttons (Step up/down)
D
22 additionally programmable buttons
In learn mode only one function per button or digipot is programmable. Delegation
functions are not available. Also, functions of the display panel RPV are not recor-
dable.
1. General
1