Software Upgrading - Panasonic KX-NS1000 User Manual

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

5.5.9 Software Upgrading

Description
The main software of the PBX, as well as the software of other connected devices can be updated either
manually or automatically.
Obtaining updates manually
Obtaining software updates (downloading the update to the PBX) can be done manually via Web
Maintenance Console. In this case, software updates can be obtained from an FTP server, a USB memory
device connected to the PBX, or a PC that can access Web Maintenance Console.
Obtaining updates automatically
The PBX can automatically check for and download updates from an FTP server. Also, a notification e-mail
can be sent to specified e-mail addresses when an update becomes available and when it is downloaded.
Also, the PBX can be configured to check for updates automatically, but not to download them.
Installing an update can be done either manually via Web Maintenance Console, or on a set schedule.
The software of the following types of devices and components can be updated:
Data Type
Main software data
LPR (software on a slot card) software data
Cell Station (CS) software data
IP-PT/SIP extension software data
*1
Only Panasonic telephones are supported. For details about a specific telephone, refer to the telephone's documentation.
One-look Networking
In a One-look network (® 4.2 One-look Networking), the main software of Slave units and the software of
devices connected to Slave units can be updated from the Master unit.
Conditions
The software version of the mother board can be confirmed through system programming.
In a One-look network (® 4.2 One-look Networking), the main software of all units (Master units and Slave
units) must be the same.
Installation Manual References
4.3.1 Mother Board
PC Programming Manual References
5.1 System Control—Program Update
9.2 PBX Configuration—[1-1] Configuration—Slot—Summary—
Operating system data area on the PBX's mother board
Flash ROM on a slot card (e.g., BRI4+SLC2)
This includes the LPR software of legacy gateways
(® 5.3.1 Stacking Connection).
Flash ROM on a CS
This includes the Flash ROM on CSs connected through a
legacy gateway (® 5.3.1 Stacking Connection).
Firmware of supported IP-PTs and SIP extensions
*1
5.5.9 Software Upgrading
Description
Card Type
Feature Guide
493

Advertisement

Table of Contents
loading

Table of Contents