Custom Service Report (Crep) - Panasonic KX-TVP50 Installation Manual

7.2.11 Custom Service Report (CREP)

The CREP command is used to display the Custom Service menu access count, the keypad
assignments, message recording status and the tree-structure of the Custom Service.
Type CREP, Press Space, Enter the Custom Service number (1-100), and Press RETURN.
Custom [100] (System) (Access: 9 ) (Menu Msg. : None)
| < multilingual pick >
[N]- Xfer Mbx (998)
[0 ]- Operator
[1 ]- Custom [1] (System) (Access: 2) (Menu Msg. : None)
| | < english service>
| [N]- Operator
| [0 ]- Operator
| [1 ]- A.A. Service
| [2 ]- V.M.Service
| [3 ]- FAX Transfer
| [ ]- Subscriber
[2 ]- Custom [2] (User -1) (Access: 2) (Menu Msg. : None)
| | <Spanish service>
| [N]- Operator
| [0 ]- Operator
| [1 ]- A.A. Service
| [2 ]- V.M.Service
| [3 ]- FAX Transfer
| [ ]- Subscriber
[3 ]- Custom [3] (User -2) (Access: 3) (Menu Msg. : None)
| | < vietnamese service>
| [N]- Operator
| [0 ]- Operator
| [1 ]- A.A. Service
| [2 ]- V.M.Service
| [3 ]- FAX Transfer
| [ ]- Exit
[4 ]- Dept Dial
[5 ]- Repeat Menu
[ ]- Exit
[# ]- Main Menu
Custom [100]:
System:
Access: 9:
Menu Msg. :None:
SYSTEM MAINTENANCE AND TROUBLESHOOTING
Indicates that Custom Service No. is "100."
Indicates that "System" prompts are active.
Indicates that this Custom Service was accessed 9 times
by callers. This counter can be cleared. See
7.2.12 Custom Service Menu Access Count Clear
(CCLR).
Indicates that the menu message for this Custom Service
is "None (not recorded)". If menu message is recorded,
"Rec" will appear.
7.2 UTILITY COMMANDS
131