► Error Code
M2-1110
► Error message
Jam inside machine
► Symptom
A paper jam was detected at the feed sensor.
► Troubleshooting method
1) Remove the jammed paper. (Refer to 4.1.3)
If the error persists, check the followings.
2) Check if the feed sensor connector is connected properly.
(Refer to 3.3.21)
3) Check if the Regi roller is contaminated or worn out. If yes, replace it.
4) Check if there is any obstacles or contamination in the paper path. If yes, clean or remove it.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Alignment and Troubleshooting
4-60