Connecting To Various Devices; Connecting To Devices - JVC DLA-HD10KSU/E Instructions Manual

Connecting to Various Devices

Connecting to Devices

Before connection, be sure to turn off both the projector and the device to be connected.
● Read the manual that is supplied with the device to be
connected thoroughly.
Connecting to Devices
● Depending on your DVI-D cable, the signal may attenuate and the image become unstable.
● When using a DVI-D cable longer than 5 m, the use of a split system or optical fiber cable is recommended.
● Video signals that can be input to this unit are 1080/50p and 1080/60p signals for DVI-D.
Control from external device
It is possible to control this unit by connecting a computer to the [RS-232C] terminal at the rear of this unit.
● Please request a connection cable from us if needed.
● For details, please consult your authorized dealer.
24
Rear side of this unit
RVICE
DVI OUTPUT
Rear side of this unit
RVICE
RS-232C Connection Cable
(Sold Separately) (Cross Cable)
RS-232C DVI
Connect to a
[DVI] terminal
DVI-D cable
RS-232C DVI