Advertisement
I
I
RM-M150 REMOTE CONTROL UNIT
Adjust the screen size with the remote control's ZOOM (T/W)
buttons.
Press the ZOOM (W) button.
Press the ZOOM (T) button.
Adjust focus with the following buttons on the remote control
unit.
Press the FOCUS + button.
Press the FOCUS – button.
Set in accordance with the screen aspect ratio that will be
used. When a screen aspect ratio of 16:9 is used, a 4:3
image can be projected within the screen without using the
zoom function.
Press the "W" button.
Press the "S" button.
I
I
RM-M150 REMOTE CONTROL UNIT
Video image can be temporarily turned off.
Video image instantly turn off.
Video image come on again.
• When the projected image input is changed, the HIDE
function is canceled and the image return.
If the image projected on the screen is distorted in trapezoid
form, correct it with the KEYSTONE buttons on the projector.
When the KEYSTONE button is pressed, "Keystone"
appears on the screen together with the level bar and set
value (–80 to 128). When "15 sec." is displayed in the menu,
"Keystone" will appear in approximately 15 seconds.
Keystone
123
The trapezoid form is corrected as shown in the figure.
The top bottom inverted trapezoid form is corrected as
shown in the figure.
(Adjusted value:0)
• The trapezoidal distortion (keystone) can be adjusted from
the option menu. (Refer to page 53.)
• The range of the trapezoidal distortion adjustment is
approximately 20° in the vertical direction.
• Interference patterns may appear on the screen when
adjusting the keystone. This is not a malfunction.
• Depending on the type of signal, some noise may appear in
the picture when the keystone is adjusted.
This is not a malfunction.
Advertisement
