Samsung OfficeServ 7100 Technical Manual page 476

OfficeServ 7100
TECHNICAL MANUAL
ALM ALM
NO. CODE
16 MJC02
17-23 NOT USED
24 MJC10
25 MJC11
26 MJC12
27 MJC13
28-29 NOT USED
30 MJC16
31 MJC17
32 MJD01
33 MJD02
34 MJD03
35 MJD04
36 MJD05
37 MJD06
38 MJD07
39 MJD08
MMC: 852
ALARM
Tone Fault
AA-DTMF Fault
AA-DTMF Rec
E911 Restart
E911 Block
WLI Restart
WLI Block
Sync Failure
Sync Recovery
Red Alarm
Red Alarm Rec
Yellow Alarm
Yellow Alarm Rec
Blue Alarm
Blue Alarm Rec
Home Page
PROGRAMMING
PART 2 APRIL 2007
DEFINITION
An abnormal interrupt has occurred in
the system tone resources. IE busy,
ringback, error, no more calls etc.
An abnormal fault reported in one of the
systems AA card DTMF resources.
An abnormal fault reported in one of the
systems AA card DTMF resources has
recovered.
An E911 card has rebooted
An E911 card could not be accessed
The WLI card has restarted
The WLI card could not be accessed
Clocking on PRI cards has become
asynchronous.
Clocking on PRI cards has become
synchronous.
Locally detected loss of PCM carrier on
PRI card for more than 250 ms.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
PCM carrier detected locally on PRI
cards.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
Remotely detected failure transmitted in
frame on PRI card.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
Remotely detected failure restored
transmitted on PRI card.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
All one's being transmitted on facility on
PRI card.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
A blue alarm condition has been
cleared.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
Table of Contents