Gige Ts Mode Menu; Ts Mode Field; Dsmcc Field; Gige Xcoder Dest Addr Menu - Motorola DSR-6100 Operator's Manual

3

GigE TS Mode Menu

TS Mode Field

DSMCC Field

GigE Xcoder Dest Addr Menu

Xcoded Dest Addr Field

Port Field

52
Press the  buttons until the Port GigE TS Mode menu appears. Use this menu
to select which transport stream is routed to the GigE port and whether the DSMCC
data is also routed to the GigE port.
Press the 4 button until the cursor is at the TS Mode label, and press the ENTER
button to move into the field. Press the  buttons to choose one of the four
options: Off, Transcoded, Passthru, or Transcoded+Passthru. When the Passthru or
Transcoded+Passthru is selected, a copy of the ASI #1 transport stream is routed to
the GigE port. When the Transcoded or Transcoded+Passthru is selected, a copy of
the ASI #2 transport stream is routed to the GigE port. Press ENTER to confirm the
selection and exit the field.
Press the 4 button until the cursor is at the DSMCC label, and press the ENTER
button to move into the field. Press the  buttons to choose either Off or On.
When On is selected, the DSR-6100 outputs an IP stream that contains DSMCC
data, when the input MPEG-4 program contains DSMCC data. Press ENTER to
confirm the selection and exit the field.
Press the  buttons until the Port GigE Xcoder Dest Addr menu appears. Use
this menu to set the GigE transcoded destination address and the associated port.
Press the 4 button until the cursor is at the Xcoded Dest Addr label, and press the
ENTER button to move into the field. Use the arrow button ( 4 ) to enter the
desired address and press the ENTER button to confirm the selection and exit the field.
Press the 4 button until the cursor is at the Port label, and press the ENTER button
to move into the field. Use the arrow button ( 4 ) to enter the desired value
and then press the ENTER button to confirm the selection and exit the field.
Default: Off
Default: Off
Default: 192.168.054.201
Default: 06100