About Function Key Programming (∗57 Menu Mode); Programming Function Keys - Honeywell Ademco Vista-12D Installation And Setup Manual

Installation and Setup Guide
About Function Key Programming (∗ ∗ ∗ ∗ 57 Menu Mode)
The system provides the ability to program each of the four keypad function keys to perform
one of 12 system operations. The end user can then activate the function by simply pressing
and holding the programmed key for 2 seconds. Typical functions (listed below) include
single-button arming, turning lights on/off, or single-button paging.

Programming Function Keys

Function key programming involves:
1. Assigning the function key number and partition;
2. Selecting the desired function for that key.
Start Function Key Programming mode by pressing
The following prompts are displayed:
PROMPT
Press Key to Pgm
0 = Q u i t 0
Partition
1
5-20
VALID ENTRIES
Function Key
Press the desired function key,
A-D.
[∗] to continue
Partition Number
1 = partition 1
2 = partition 2
3 = partition 3
[∗] to continue
∗
57 while in Data Programming mode.
EXPLANATION
Press the desired function key (A-D) you want to
program.
NOTE: A key programmed as a function key is no
longer available to be used as an end-user macro
key or panic key.
A 1
OFF
4
B
MAX
C 7
INSTANT
D
*
READY
Enter the partition in which the function key is
active.
2 3
AWAY STAY
5 6
TEST BYPASS
8 9
CODE CHECK
0 #