Table of Contents
Advertisement
Basic operations
Sleep Timer [SLEEP]
The system turns off automatically when the specified period of
time has passed.
Press SLEEP.
Each time you press the button, the shut-off time changes.
Example:
S L E E P
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly.
To cancel
Press SLEEP repeatedly until "SLEEP – –" appears.
• Turning off the power also cancels the Sleep Timer.
Adjusting the output level
of the subwoofer and
speakers
Press each speaker button you want to
adjust the output level and then LEVEL +/–.
• FRONT L:
Front Left speaker
• FRONT R:
Front Right speaker
• SURR. L:
Surround Left speaker
• SURR. R:
Surround Right speaker
• CENTER:
Center speaker
• S.WFR:
Subwoofer
NOTE
• You can also make adjustments by using the setup menu shown on the
TV screen. (A pg. 38)
• The adjustments take effect for all sources.
Adjusting the treble
sound [TREBLE]
Press TREBLE and then LEVEL +/–.
NOTE
• The adjustments take effect for all sources.
Adjusting the bass sound
[BASS]
Press BASS and then LEVEL +/–.
NOTE
• The adjustments take effect for all sources.
17
minutes
6 0
Changing the scan mode
The system can be accommodated to your TV's scan mode.
NOTE
• To use the system in PROGRESSIVE mode, it is required that the
center unit is connected to the TV by using a component video cord
(not supplied). (A pg. 11)
7 While DVD is selected as the source and stopped
1
Press and hold SCAN MODE for
2 seconds.
"NTSC", "PAL" or "NTSC PRG", "PAL PRG" appears on the
display window.
2
Press Cursor 3/2 to select the desired
mode.
• NTSC:
Select when your TV supports the NTSC
interlaced video input only.
• NTSC PRG:
Select when your TV equipped with
component jacks supports the NTSC
progressive video input.
• PAL:
Select when your TV supports the PAL
interlaced video input only.
• PAL PRG:
Select when your TV equipped with
component jacks supports the PAL
progressive video input.
You can get better picture quality in NTSC PRG, PAL PRG
mode than in NTSC, PAL mode.
3
Press ENTER while the selected mode
is displayed.
When "NTSC PRG" or "PAL PRG" is selected, the
PROGRESSIVE indicator lights on the display window.
NOTE
• Although the picture may be distorted when you press ENTER, this
is not a malfunction of the system.
• There are some progressive TVs and High-Definition TVs that are
not fully compatible with this system, resulting in an unnatural
picture when playing back a DVD VIDEO in the progressive scan
mode. In such a case, change the scan mode to "NTSC" or "PAL".
To check the compatibility of your TV, contact your local JVC
customer service center.
• All JVC progressive TVs and High-Definition TVs are fully
compatible with this system.
See page 15 for button locations.
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
