Sleep Timer [Sleep]; Adjusting The Treble Sound [Treble]; Adjusting The Bass Sound [Bass]; Changingthe Scan Mode - JVC TH-C7 Instructions Manual

Basicoperations I
See page 16 for button locations. I
The system turns off automatically when the specified period of
time has passed.
Press SLEEP.
Each time you press the button, the shut-off time changes.
Example:
minutes
SLEEP
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly.
To cancel
Press SLEEP repeatedly until "SLEEP--" appears.
• Turning off the power also cancels the Sleep Timer.
Adjusting the output level
of the subwoofer and
Press each speaker button you want to
adjust the output level and then LEVEL +/-.
• FRONT L:
Front Left speaker
• FRONT R: Front Right speaker
• SURR. L: Surround Left speaker
• SURR. R: Surround Right speaker
• CENTER: Center speaker
• S.WFR: Subwoofcr
NOTE
• You can also make adjustments by using tilesetup nlenu shown on tile
FV screen.( pg. 37)
• Fhe adjustments take elleer R)r all sources.
Changing the scan mode
'l]_e system can be accommodated to your TV's scan mode.
NOTE
• To use tile system in PROGRESSIVE mode, it is required that tile
center unit is connected to tile TV by using a component video cord
(not supplied). ( pg. 12)
• While DVD is selected as the source and stopped
] Press and hold SCAN MODE for
2 seconds.
"INT-LACE" or "PROGRESS" appears on the display
window.
2 Press Cursor =,-/_ to select the desired
mode.
• INT-LACE:
Select this when your TV supports the
interlaced video input only.
• PROGRESS: Select this when your TV equipped with
component jacks supports the progressive
vide() input.
You can get better picture quality in PROGRESSIVE mode
than in INTERLACE mode.
3 Press ENTER while the selected mode
is displayed.
When "PROGRESS" is selected, the PROGRESSIVE
indicator lights on the display window.
NOTE
• Although tile picture may be distnrted v\hen you press ENTER, this
is not a malfunction ol the system.
• There are some progressive TVs and lligh-Deiinition TVs that are
not fully compatible with this system, resulting in an unnatural
picture when playing back a DVD VIDEO in the progressive scan
mode. In such a case, change the scan mode to "INT-LACE'.
To check the compatibility of your TV, contact your local JVC
custonler service center.
• All JVC progressive TVs and Iligh-Definition TVs are fully
compatible with this system.
Press TREBLE and then LEVEL +/-.
NOTE
• "l]leadjtJstments take elleer lor all sources.
Adjusting the bass sound
Press BASS and then LEVEL +/-.
NOTE
• The a([iustments take ellect lor all sources.
18