8.4.
Wireless unit (Receiver)
8.4.1.
Remove the Front cover and Holder
metal
1. See Service Hint (Section 3.1.3.)
8.4.2.
Remove the WR-Board
1. Remove the screw (×1
shield cover.
2. Remove the BB heat sink.
3. Remove the screws (×5
) and remove the WR-Board
).
4. Disconnect the connectors (WR1 and WR81).
5. Remove the WR-Board.
8.4.3.
Remove the RF heat sink
1. Remove the WR-Board. (See section 8.4.2.)
2. Remove the screws (×2
sink.
40
) and remove the RF heat