8.2.
Display unit
8.2.1.
Remove the Speakers (L, R)
1. Remove the Speaker cables (L, R).
2. Remove the screws (×4
(L, R).
3. Remove the screws (×4
mounting brackets (LT, RT, LB and RB).
) and remove the Speakers
) and remove the Speaker
8.2.2.
Remove the Pedestal stand
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the screws (×4
3. Remove the screws (×4
stand.
4. Remove the screws (×4
(L, R).
30
) and remove the Stand cover.
) and remove the Pedestal
) and remove the Stand holder