Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Black & Decker MFL143
Summary of Contents for Black & Decker MFL143
- Page 1 MFL143...
-
Page 4: Intended Use
ENGLISH (Original instructions) Intended use d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep Your Black & Decker multi-purpose tool has been designed for cord away from heat, oil, sharp edges or moving a wide range of DIY applications. - Page 5 (Original instructions) ENGLISH Additional power tool safety warnings b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with Warning! Additional safety warnings for drills the switch is dangerous and must be repaired. and impact drills c.
-
Page 6: Safety Of Others
ENGLISH (Original instructions) Keep blades sharp. Dull or damaged blades may cause Do not let children or pregnant women enter the work the saw to swerve or stall under pressure. Always use the area. appropriate type of saw blade for the workpiece material Do not eat, drink or smoke in the work area. -
Page 7: Electrical Safety
(Original instructions) ENGLISH When assessing vibration exposure to determine safety Electrical safety measures required by 2002/44/EC to protect persons regularly Your charger is double insulated; therefore no using power tools in employment, an estimation of vibration earth wire is required. Always check that the exposure should consider, the actual conditions of use and the mains voltage corresponds to the voltage on the way the tool is used, including taking account of all parts of the... - Page 8 ENGLISH (Original instructions) Fitting and removing a drill bit or screwdriver bit Fitting and removing the dust extraction adaptor (fig. G) The drill/screwdriver head is fitted with a keyless chuck to allow for an easy exchange of bits. Line up the dust extraction adaptor (17) with the sanding Lock the tool by setting the forward/reverse slider (2) to head (13) as shown.
-
Page 9: Hints For Optimum Use
(Original instructions) ENGLISH Charger diagnostics Sawing If the charger detects a weak or damaged battery, the charg- To switch the tool on, press the variable speed switch (1). ing indicator (19) will flash red at a fast rate. Proceed as The tool speed depends on how far you press the switch. -
Page 10: Protecting The Environment
ENGLISH (Original instructions) Do not force the saw blade into the workpiece. Note that Unplug the charger before cleaning it. Your charger does cutting sheet metal will normally take more time than saw- not require any maintenance apart from regular cleaning. ing thicker wooden workpieces. -
Page 11: Technical Data
Current Approx. charge 5 - 7 Technical data time MFL143 (H1) Level of sound pressure according to EN 60745: Voltage 14.4 Sound pressure (L ) 82.7 dB(A), uncertainty (K) 3 dB(A) - Page 12 ENGLISH (Original instructions) Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
- Page 15 ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
- Page 16 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...