Video Doctor (Self-Diagnosis); Wide Screen Compatibility 16:9; To Set The Decoder - JVC LPT1056-001A Instructions Manual

Additional Operation - VCR part

Video Doctor (Self-Diagnosis)

This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
screen.
1. Press i.
Press 2 or 1 to select
Press ENTER/OK.
1 2
Pr-12
P SET
SET SYS
ACMS
R
f
OSD OSD
ON
OFF
2. Press 3 or 4 to check a problem.
ANTENNA CONNECT
• PLEASE CHECK:
Connect the aerial into the jack securely.
HEAD STATUS
• PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
• NOT RECORDABLE:
Insert a tape with its protection tab in place
NO. OF TIMER PROGRAMME
• 2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
• PR-01 26 10:00~11:00 SP
Shows the current status of timer recording.
3. Press i to remove the menus from the TV screen.

Wide Screen Compatibility 16:9

Your DVD+VCR can record and play back wide screen
aspect ratio programmes (16:9). To record a wide screen
format programme successfully the correct type of wide
screen signal must be broadcast by the TV station.
1. Switch on your DVD+VCR.
Press i.
Press 2 or 1 to select
Press ENTER/OK.
1 2
Pr-12
P SET SET
ACMS SYS
R
f
OSD
OSD
ON
OFF
26
.
ANTENNA CONNECT
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
PLEASE CHECK
.
1 2
Pr-12
P SET SET SYS
ACMS AUTO
R
4:3
f
OSD OSD
ON 16:9
OFF i
2. Press 3/4 repeatedly to select: AUTO, 4:3 or 16:9.
AUTO:
Automatically plays back Wide-Screen programmes
as Wide-Screen and Normal programmes as
normal.
4:3:
Only for playing back and recording Normal format
recordings (4:3).
16:9:
Only for playing back and recording Wide-Screen
format recordings (16:9).
i
3. Press i to remove the menus from the TV screen.
To enjoy Wide-Screen playback you must connect
your VCR to the TV using a SCART cable.

To set the decoder

We have already described, how to connect a decoder
for pay-TV station as DECODER or PREMIERE on page
10. For the recording of an encoded station you do not
have to control anything. You just select the station and
wait shortly until the decoding will start.
1. Press i.
The main menu will appear on the TV screen.
Press 2 or 1 to select the DECODER.
Press ENTER/OK.
2. Press 3 or 4 to select.
ON: When the decoder is connected to the AV2
socket.
OFF: When another VCR is connected to the AV2
socket.
1 2
Pr-12
P SET
SET SYS
ACMS AUTO
R
4:3
f
OSD OSD
ON
16:9
OFF i