Honda 2004 S2000 Owner's Manual page 79

Main Menu Table of Contents
Vents, Heating, and A/C
Air flows from the defroster
vents at the base of the windshield
and the vents on both sides of the
instrument panel.
When you select
automatically switches to Fresh Air
mode and turns on the A/C.
76
Comfort and Convenience Features
Ventilation
The flow-through ventilation system
draws in outside air, circulates it
through the interior, then exhausts it
through vents behind the seat-backs.
, the system
1. Turn the temperature control dial
all the way to the left.
Make sure the A/C is off.
2.
3. Select
4. Set the fan to the desired speed.
Using the Heater
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
1. Select
2. Set the fan to the desired speed.
Adjust the warmth of the air with
3.
the temperature control dial.
Using the A/C
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
45
turn off the A/C until the gauge
reads normally.
1.
and Fresh Air mode.
2.
3.
4.
5.
and Fresh Air mode.
If the interior is very warm,
cool it down more rapidly by partially
opening the windows, turning on the
A/C, and setting the fan to
maximum speed in Fresh Air mode.
). If it moves near the red zone,
Turn on the A/C by pressing the
button. The indicator in the button
comes on when a fan speed is
selected.
Make sure the temperature
control dial is all the way to the left.
Select .
If the outside air is humid, select
Recirculation mode. If the outside
air is dry, select Fresh Air mode.
Set the fan to the desired speed.
you can