Brake System Indicator - Honda 2004 S2000 Owner's Manual

Main Menu
Table of Contents

Brake System Indicator

The brake system indicator
U.S.
normally comes on when
you turn the ignition switch
to ON (II), and as a
Canada
reminder to check the
parking brake. It will stay
on if you do not fully
release the parking brake.
If the brake system indicator comes
on while driving, the brake fluid level
is probably low. Press lightly on the
brake pedal to see if it feels normal.
If it does, check the brake fluid level
the next time you stop at a service
station (see page 136 ).
If the fluid level is low, take your
vehicle to a dealer and have the
brake system inspected for leaks or
worn brake pads.
168
Taking Care of the Unexpected
However, if the brake pedal does not
feel normal, you should take
immediate action. A problem in one
part of the system's dual circuit
design will still give you braking at
two wheels. You will feel the brake
pedal go down much farther before
the vehicle begins to slow down, and
you will have to press harder on the
pedal.
Slow down by shifting to a lower
gear, and pull to the side of the road
when it is safe. Because of the long
distance needed to stop, it is
hazardous to drive the vehicle. You
should have it towed and repaired as
soon as possible (see Emergency
Towing on page 176 ).
If you must drive the vehicle a short
distance in this condition, drive
slowly and carefully.