NEC Univerge SV8100 Features And Specifications Manual page 474

Issue 1.0
Depending on your environment, the maximum number of cordless devices used without
interference varies.
Multiple Base Units and handset units should not be closer than 20 feet anytime.
Radio interference causes interruptions in conversation. When this happens, your unit is not
defective. When noise continues, move to a different location while you talk. (You might even
need to move the base unit.) When the situation persists, contact NEC Unified Solutions,
Inc., National Technical Assistance Center (NTAC).
Environments with many metal parts, metal shelves, or metal buildings have been found to
reduce telephone performance.
Dterm cordless phones are not supported with the Door Box feature.
The Dterm Cordless Lite II can be used in conjunction with the UNIVERGE SV8100 and
Series i Digital Multiline Telephones.
Under certain conditions, HOLD and TRANSFER have the same behavior. To prevent an
unwanted transfer after placing a call on hold and calling another user, the Line Key for the
call on hold must be pressed to retrieve the call from hold, otherwise the call will be
transferred when the Cordless Terminal is placed into an idle condition.
Dterm Cordless telephones do not support the Caller ID List feature.
Under certain conditions, the Hold Key and the Transfer Key behave the same way. To
prevent an unwanted transfer after placing a call on hold and calling another user, press the
Line Key for the call on hold to retrieve it from hold. Otherwise, the call is transferred when
the Cordless Terminal is returned to idle.
Default Setting
None
System Availability (US Only)
Terminals
DTR-4R-1( ) TEL
Required Component(s)
CD-8DLCA
-OR-
CD-8DLCA with PZ-8DLCB Daughter Board
-OR-
CD-16DLCA
2 - 450
UNIVERGE SV8100
term
Cordless II Terminal
D