Motorola ET1 User Manual page 104

10 - 6 ET1 Enterprise Tablet User Guide
Troubleshooting the ET1 Enterprise Tablet (Continued)
Table 10-1
Problem
A message appears
stating not enough
storage memory.
The ET1 does not
decode when reading
bar code.
ET1 cannot find any
Bluetooth devices
nearby.
Cause
Too many Remove user-installed applications on the ET1 to recover
applications installed
memory. Select
on the ET1.
Applications. Select the unused programs and touch
Uninstall.
DataWedge is not Ensure that DataWedge is enabled and configured properly.
enable. Refer to the ET1 Enterprise Tablet Integrator Guide for more
information.
Unreadable bar Ensure the symbol is not defaced.
code.
Distance between Place the ET1 within proper scanning range.
the ET1 and bar
code is incorrect.
ET1 is not Program the ET1 to accept the type of bar code being
programmed for the scanned. Refer to the ET1 Enterprise Tablet Integrator Guide
bar code type. for DataWedge configuration.
ET1 is not If the ET1 does not beep on a good decode, set the
programmed to application to generate a beep on good decode.
generate a beep.
Too far from other Move closer to the other Bluetooth device(s), within a range
Bluetooth devices. of 10 meters (30 feet).
The Bluetooth Turn on the Bluetooth device(s) to find.
device(s) nearby are
not turned on.
The Bluetooth Set the Bluetooth device(s) to discoverable mode. If needed,
device(s) are not in refer to the device's user documentation for help.
discoverable mode.
Solution
> Settings > Applications > Manage