Replacement Of Key Tops - Sony DVS-7000A Installation Manual

3-8. Replacement of Key Tops

The control panels are supplied with a cap pull tool.
Remove or install the key top in the following procedures.
For removing the key tops, use the cap pull tool.
Part number: 3-179-054-01
(1) Push down the key top on both sides and insert the cap pull tool in the gap between key and sides.
(Fig. 1)
(2) Hold the key top to remove it. (Fig. 2)
(Fig. 1)
(3) Remove the diffusion plate (milky white color) by the cap pull tool from the removed key top.
(4) Insert the switch tip between diffusion plate (milky white color) and key top (clear), and assemble
them by pushing in the key.
(Fig. 3)
DVS-7000AE IM
Cap pull tool
Hook the tool here and pull out thekey top.
Cap pull tool
(Fig. 2)
(Fig. 4)
3-8. Replacement of Key Tops
Key top
Switch tip
Diffusion plate
3-15