Replacement 70 COVER POLE R (PL13.1.8)
1)
Replace the COVER POLE R to the printer by inserting the rim on the front side of the
COVER POLE R into the inside of the TOP COVER and the RIGHT COVER.
2)
Mate the lug of the front mounting section of the COVER POLE R with the notch of the
printer.
3)
Secure the COVER POLE R to the printer using the four screws (silver, 6mm).
Go to the next replacement step:
Replacement 71 COVER POLE IN R (PL13.1.4)
Version 1 2006.11.28
Chapter 3 Removal and Replacement Procedures (RRPs)
3)
1)-1
1)-1
3 - 220
2)
3)
3)
1)-2
3)
Gnb03218KA