Embedded Number; Storing A Number From A Message - Motorola MTM5400 Feature User Manual

Select one of the following:
4
• Store — Saves a message as a template. Change the default template name and press Ok.
• Delete — Deletes the selected message. Press Yes to confirm.
• Delete All — Deletes all the messages in the Inbox/Outbox. Press Yes to confirm.
• Reply (only for Inbox) — Invokes the edit screen with the old message as default text and the message
originator as a recipient. After editing, press Send, the PTT button, or the SEND key to send.
• Resend (only for Outbox) — Invokes the edit screen with previously entered text with the same
recipient. After editing, press Send, the PTT button, or the SEND key to send.
• Forward — Invokes the edit screen with the old message to send it to a different participant. After
editing, press Send, the PTT button, or SEND key to send.
• Refresh — Re-orders the message list and displays the new messages.
• Delivery Status (only for Outbox) — Shows the date and time of the message when it sent, delivered,
read, and expired was not delivered, expired was not read, failed unknown.

5.4.2.4 Embedded Number

This feature allows you to call a number from a message or to start a group call with the message sender talkgroup.

5.4.2.5 Storing a Number from a Message

Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can save the sender's or embedded number from the message to a new or existing
contact.
Procedure Steps
1 From the home screen, press MENU key.
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
Press the PTT button.
4
5 Radio displays a list of the numbers (including the senders number).
Highlight the required number and press Store.
6
7 Highlight required contact and press View.
To store a number for a new contact, select [New Contact] and fill out the required fields. Press Done
to save it..
8 Select Edit.
-
5.4.2.4 Embedded Number
5-9