Dynamic Group Number Assignment (Dgna) - Motorola TETRA MTM800 Manual

Activated Transmit Inhibit is indicated by the solid orange
LED and changing between the two displays:

Dynamic Group Number Assignment (DGNA)

DGNA provides the ability for a network operator or
authorised user to dynamically allocate new, or update
existing talkgroups to selected terminals over the air
interface. Using supplementary services messages (SS-
DGNA), the network operator can command the terminal to
add talkgroups to the existing talkgroups list, or to delete
talkgroups from the list. This operation is performed by
transmitting the data into your MTM800.
Your Service Provider can gather some Talkgroups under one
Super-group and transmit it to your MTM800 as a DGNA. In
such a case, you will be able to participate in calls to/from all
the groups in the Super-group.
DGNA Reception with Notification Message
When a DGNA is received and DGNA
notification was configured by your Service
Provider, you will get a tone indication and
notification message ("Programming
Entries..."), and then a display of the new assignments.
If DGNA notification was not configured by your Service
Provider, you will only get a tone indication and only if a
selected group was changed by the DGNA.
1. To view the added/deleted talkgroups de-
tails press
list using the
36
Range 10
Talkgroup 1
You may scroll through the
.
, keys.
Range 10
TXI Mode
6 TG Added
A: <name1>
<range>