Overlay Copying With Registered Image - Panasonic Workio DP-C262 Operating Instructions Manual

Overlay Copying with Registered Image

Overlay an image stored in memory onto the copy.
Available size is A4.
"Auto" cannot be selected in colour mode.
If the orientation of the original is different from the form, the original is copied by automatically rotating when
overlaid.
If enlargement or reduction is selected using "Zoom" or the paper size setting, the size of the original is
enlarged or reduced according to the setting. However, the size of the form is not enlarged or reduced.
When "Edge" or "Book" is selected, the edge erasing function and the centre erasing function are not executed
for the overlay original.
When "Margin" is selected, a binding margin is also set for the overlay original.
When "Cover" or "Page Insertion" is selected, if the cover page and inserted pages are not set to be copied,
the overlay is not executed for Blank pages. If these pages are selected to be copied, the overlay is executed
for copied pages.
Note that if the power is turned OFF when optional hard disk drive is not installed, the overlay image is erased.
1
Place original(s).
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
Depending on the orientation setting,
"Landscape" or "Portrait" is selected.
2
Press the Copy key if set in other
function mode.
3
Select "More Menus".
80
Form The scanned
original
4
Select "Insertion/Overlay", and then
select "Form Overlay".