Panasonic Workio DP-C262 Operating Instructions Manual page 77

5
Select the colour of the overlay
original from the basic colours and
registered custom colours, and then
select "OK".
When selecting from the
When selecting from the registered
custom colours
If "Add Custom" is selected, Add Custom
screen is displayed, and Colours can be
registered. Refer to the New Colour
Registration (see page 14)
6
Adjust the overlay density with "Lighter"
and "Darker", and then select "OK".
Lighter Overlay density level is
decreased.
Darker Overlay density level is
increased.
basic
colours
7
Select the overlay position, and the
select "OK".
Overlay Copied with the scanned original
on Top overlaid on the overlay original.
Overlay Copied with the overlay original
on Bottom overlaid on the scanned original.
8
Enter the desired number of copies.
9
Press the Start key.
When the overlay copying is completed, the
overlay original registration confirmation
screen is displayed.
When copying from the Platen Glass, place
the next original and follow the instructions
described on the touch panel display.
10
Select "Yes" or "No".
Yes Register the overlay image.
No Clear the overlay image.
If Hard Disk Drive is installed, you will be
asked where to register the overlay original.
<Continue to the Next Page>
77