Epson Stylus Pro 3800 Service Manual page 178

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
14. Write a line on the ink tube with a pencil at the position shown in
15. At the 105 mm lined position, align the upper side edge of the FFC with the ink
tube as shown in Figure 4-117, and wrap acetate tape around the FFC and ink
tube.
16. At the 250 mm lined position, wrap acetate tape around the ink tube.
17. Attach the Holder, FFC to the taped portion of the ink tube and secure the FFC and
GUIDE, TUBE, CR together with the ink tube.
DISASSEMBLY & ASSEMBLY
Figure 4-116.
Holder, FFC
Step 17
Ink tube
Disassembly/Assembly Procedure (Group 1)
Write a line Write a line
250 mm
Figure 4-116. Writing a line on the Ink Tube
Lined position
GUIDE, TUBE, CR
Acetate tape
Holder, FFC
FFC
GUIDE, TUBE, CR
Figure 4-117. Securing the FFC
Revision C
Edge face of
HOLDLER,FFC,TUBE
105 mm
HOLDER,FFC,TUBE
Lined position
Step 15
Upper side edge of FFC
Ink tube
FFC
178