User Guide: PTP 600 Series
Configuration options for TDD synchronization
This section describes the different configuration options that may be used for
implementing TDD synchronization in the PTP 600 Series. Schematic diagrams are
included.
TDD synchronization configurations supported
The PTP 600 supports the following TDD synchronization configurations:
•
Single link configuration with UltraSync.
•
Single link configuration with PTP-SYNC.
•
Cluster with PTP-SYNC and GPS receiver.
•
Cluster with PTP-SYNC and no GPS receiver.
NOTE
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
If PTP-SYNC is the selected TDD synchronization method, select a 1 Hz
timing reference for the system. This will normally be a GPS receiver
module.
Configuration options for TDD synchronization
2-27