Input/Output Terminals; Dimensions - JVC LM-H171 Instructions Manual

Specifications
(cont.)

7 Input/output terminals

Model name LM-H191
Video
VIDEO 1 IN/OUT Input/output of composite signal:
1 line, BNC connector x 2, 1 V(p-p), 75 Ω
VIDEO 2 IN/OUT
* The input (IN) and output (OUT) terminals are bridge-connected (auto
termination).
VIDEO 1 Y/C Input of Y/C signal:
Y/C connector x 1
Y:
C:
DVI-D DVI-D signal input:
DVI-D connector x 1 (compatible with DDC2B)
RGB Input of analog RGB signal: D-sub 15-pin x 1
G:
G. on sync:
B, R:
H. sync:
V. sync:
C. sync:
TTL:
Audio
AUDIO INPUT
Analog audio signal input:
(VIDEO 1, VIDEO
2)
AUDIO INPUT Analog audio signal input:
(RGB, DVI-D)
External control
REMOTE (MAKE/
☞ "External Control" on page 13
TRIGGER)
• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or
composed, and may be slightly different from actual products.
• Design and specifications are subject to change without notice.
• All company names and product names mentioned herein are used for identification purposes
only, and may be the trademarks or registered trademarks of their respective companies.
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.
LM-H171
1 V(p-p), 75 Ω
0.286 V(p-p), 75 Ω (for NTSC)
0.3 V(p-p), 75 Ω (for PAL)
1 V(p-p), 75 Ω
0.3 V(p-p)
0.7 V(p-p), 75 Ω
TTL
TTL
TTL
LOW: 0 V – 0.8 V
HIGH: 2.5 V – 5 V
1 line, RCA connector,
500 mV (rms), high impedance
1 line, stereo mini jack,
500 mV (rms), high impedance

7 Dimensions

LM-H191
<Front view> <Side view>
413 (16 3/8)
1.5 (1/16)
1
* 369.5 mm (15 1/8˝) at the lower position
LM-H171
<Front view> <Side view>
30.2 (1 1/4)
374 (14 3/4)
1.5 (1/16)
* 2 339.5 mm (13 3/8˝) at the lower position
Stand bottom
104 (4 1/8)
240 (9 1/2)
<Rear view (without the stand)>
29 (1 1/4)
74 (3)
100 (4)
46
(1 7/8)
VESA mounting holes
(4-M4, depth: 10 mm)
199 (7 7/8)
<Rear view (without the stand)>
100 (4)
74 (3)
46
(1 7/8)
VESA mounting holes
(4-M4, depth: 10 mm)
199 (7 7/8)
16
Unit: mm (inch)