Menu Configuration-Set Up Menu - JVC LM-H171 Instructions Manual

Menu Configuration—SET UP MENU
For the operation procedure, see page 7.
Operation guide
Shows the buttons for each operation.
• The menu automatically disappears in about 30 seconds after the previous operation.
• Some items may not appear on the menu depending on the input or the input signal.
• The items controlled by the MAKE system do not appear on the menu.
Selected screen size
Select by pressing SCAN SIZE on the front
panel (☞ 6 on page 6).
PICTURE SUB ADJ.
Adjusts the standard level for the picture adjustment.
Item To do
1
CONTRAST* Adjust the standard level for the contrast adjusted with
CONTRAST button on the front panel.
1
BRIGHT* Adjust the standard level for the brightness adjusted
with BRIGHT button on the front panel.
1, 2
CHROMA* Adjust the standard level for the chroma adjusted with
CHROMA button on the front panel.
1, 2
PHASE* Adjust the standard level for the phase adjusted with
PHASE button on the front panel.
sub menu Display the adjustment bar for each item of "PICTURE SUB ADJ."
Select an item by pressing
reset Restore the default settings for all the items in "PICTURE SUB ADJ." regardless of the
adjustments for the Picture Mode (☞ " 7 PICTURE MODE button/lamp" on page 6).
WHITE BALANCE SET.
Selects the color temperature and adjusts the drive level of each color (R/G/B).
Item To do
COLOR TEMP. Select the color temperature.
R DRIVE, G DRIVE, Adjust the drive level of each color (red, green, and
B DRIVE* 3 blue).
sub menu Display the adjustment bar for each item of "WHITE BALANCE SET."
Select an item by pressing
reset Restore the default settings for all the items in "WHITE BALANCE SET."
SIZE/POSI. ADJ.* 2
Adjusts the size and position of the picture.
• When RGB is selected for the input, perform "AUTO ADJUST" (☞ page 10).
Item To do
4
H.SIZE* Adjust the horizontal picture size.
H.POSI.* 4 Adjust the horizontal picture position.
4
V.SIZE* Adjust the vertical picture size.
V.POSI.* 4 Adjust the vertical picture position.
reset Restore the default settings for all the items in "SIZE/POSI. ADJ."
1
* Memorized for each input.
2
* Displayed only when VIDEO 1 or VIDEO 2 is selected for the input.
* 3 Memorized for each input. Also, memorized for each color temperature setting.
4
* Memorized for each input. Also, memorized for each SCAN SIZE setting.
Setting value
–40 – +40
, then adjust the picture while viewing the actual picture.
Setting value
HIGH, LOW, USER
–20 – +20 (–255 – 255 when
"USER" is selected for "COLOR
TEMP.")
, then adjust the picture while viewing the actual picture.
Setting value
–5 – +10 – +20
–20 – 00 – +20
–10 – +5 – +15
–20 – 00 – +20
ENGLISH
11