Table 6-10: Fault Indicators (Continued From Table 6-9) - Miele W1903 User Manual

Technical Information
"Check Drain"
Buzzer sounds and "- - -"
appears in the display.
"Water Intake"
Buzzer sounds and "- - -"
appears in the display.
"Pre-Wash" OR "Rinse"
Buzzer sounds and "- - -"
appears in the display.
"Oversudsing"

Table 6-10: Fault Indicators (Continued from Table 6-9)

Additional Fault Indicators – W1966 & W1986 only
"Door Lock" The lock function has been activated. Deactivate
LED flashes the lock function to clear.
Water Drainage Failure
LED flashes
(W1986 only)
Water Intake Failure
LED flashes
(W1986 only)
Check for stored faults in the Service Mode.
LED Flashes
(W1986 only)
An oversudsing condition is present.
1. Run a drain cycle.
LED is ON
2. Ensure the correct type and/or amount of
The Program Selector Knob has been moved after
a program was started.
"Anti-Crease"
LED flashes
Turn the Selector Knob back to the originally
selected program position to clear.
W1900 Series Clothes Washers
detergent is being used.
66